Fusion L.E.D. Systems are the most complete way to quickly customize your motorcycle with LED?s, yet not spend a fortune. Our Fusion systems eliminate time consuming wiring of LEDs and simply plug into a main control module that can create the wildest flash patterns. Fusion systems come in two models: single color or million color systems. Million color systems allow you to change colors with the press of a button. Every Fusion system comes with a wireless remote, CPU, 6 LED pods (four 5" and two 3" pods) , and mounting hardware.

MODEL: SC-X6
Single Color System with 6 pods (Four 5" pods and two 3" pods)- choose red, blue, or green

LED Flex-Tech Pods: The pods are 100% waterproof and shock resistant. Each pod comes with four feet of cable and attached connector plug for easy, plug-n-play installation. The pods include double-sided adhesive tape for mounting. The double-sided 3M adhesive foam tape is pre-applied to the back of each pod to streamline the installation process. Our Flex-Tech pods can bend 180 degrees, allowing the pods to flow with the natural curves of your bike. Each 5" pod has six SMD LEDs and each 3" pod has three SMD LEDs.

Colors: The FUSION SC-X6 is available in red, blue, or green. Each system has a color intensity adjust feature that allows you to change the intensity of the color displayed with the press of a button. If you looking for more colors, check out our million color system, the FUSION MC-X6.

13 Amazing Flash Patterns:

1. Solid State: No Flashing. Includes five levels of light intensity adjustment feature.
   
2. Basic Flash: All LEDs flash on & off simultaneously. Includes light intensity adjust and flash speed adjust.
   
3. Breath Mode: LEDs gradually flash on and off; giving the impression your motorcycle is breathing. Includes light intensity adjust and flash speed adjust.
   
4. Scanning Mode: LEDs flash from front of bike toward the back, repeatedly. Includes light intensity adjust and flash speed adjust.
   
5. Strobe Mode: LEDs flash to give impression of strobing light. Includes light intensity adjust and flash speed adjust.
   
6. Chase Mode: LEDs flash on from front to back - and flash off from back to front repeatedly. Includes light intensity adjust and flash speed adjust.
   
7. Wave Ripple Mode: LEDs flash from center of bike outward. Includes light intensity adjust and flash speed adjust.
   
8. Running Mode: LEDs flash on and then off while moving from front to back ? back to front of bike. Includes light intensity adjust and flash speed adjust.
   
9. Music Mode I: Flashes to base of stereo or engine noise in front to back pattern. Includes light intensity adjust and sound sensitivity adjust.
   
10. Music Mode II: Flashes to base of stereo or engine noise in back to front pattern. Includes light intensity adjust and sound sensitivity adjust.
    
11. Music Mode III: Flashes to base of stereo or engine noise in wave ripple pattern. Includes light intensity adjust and sound sensitivity adjust.
    
12. Music Mode IV: Flashes to base of stereo or engine noise in reverse wave ripple pattern. Includes light intensity adjust and sound sensitivity adjust.
    
13. Music Mode V: Flashes to base of stereo or engine noise in mode 2. Includes light intensity adjust and sound sensitivity adjust.
    

Functions:

Flash: Change the flash pattern with the press of a button. A single beep will occur to indicate flash pattern has changed. See the list of the flash patterns (above) in their order of program sequence.

Color Intensity: Change the intensity of the color with the press of a button. System has five levels of light intensity.

Flash Speed Adjust: Change the speed of the flash pattern in modes 1 through 8 with the press of a button. Five speeds available, one chirp indicates the slowest flash speed, 5 chirps indicates the fastest speed.

Sound Sensitivity Adjust: Change the sensitivity to stereo base or engine noise in modes 9 through 13 with the press of a button. Five levels of sound sensitivity available, one chirp indicates the least sensitive, 5 chirps indicate the most sensitive.

System Power: Turn the system ON; a single chirp will confirm the system is ON. Press again to turn OFF; a double chirp indicates the system is turned OFF. You can turn the system on or off using the wireless remote or you can use the buttons located on the CPU.

System Memory: Fusion will remember the last selected color intensity, flash pattern, and flash speed/sound sensitivity so you don?t have to search for your favorite look.

THE ULTIMATE FEATURE NO ONE ELSE HAS.
Secondary Power-Up. Allows you to wire the system to a second power source such as your break lights, four-way flashers, or an alarm system output. For example, attach the secondary power to your break light power wire, so that every time you apply the breaks your LEDs will turn on (displaying the last color, flash, speed/sound selection) even though the system was turned off. As soon as you release the breaks, the LEDs will turn off again. You can connect the secondary power to any 12 volt DC power source.

WANT TO ADD MORE PODS? NO PROBLEM.
Y-Splitter Cables simply plug into the existing plug and allow you to instantly double the number of pods from 6 to 12.

FUSION MOTORCYCLE LEDs Best LED Kit for Motorcycles from FreyMoto Industries on Vimeo